Navkar Materials

High Nickel Alloy

Corrosion-resistant alloy systems for critical service at high and low temperatures.

View Material Details →
High nickel alloy manufacturing Engineered Materials
TECHNICAL DATA

High Nickel Alloy Technical Properties

Material specifications, equivalent grades, chemical composition and mechanical properties for high nickel alloy materials.

01 / STANDARDS & GRADES

Equivalent Grades

TECHNICAL DATA
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2 -
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 – LC-Ni 99 -
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe –
Monel K500 2.4375 N05500 – – – – – –
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe -
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe -
Inconel 625 2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4MNiCr22Mo9Nb NiCr23Fe -
Inconel 718 2.4668 N07718 – – – – – -
Incoloy 925 – N09925 – – – – – -
Incoloy 330 1.4886 N08330 – – – – – -
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 – X8NiCrAlTi32-21 XH32T
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Hastelloy C22 2.4602 N06022 NW 6022 - - - NiCr21Mo14W -
Hastelloy C276 2.4819 N10276 NW 0276 - ХН65МВУ - NiMo16Cr15W ЭП760
Hastelloy B2 2.4617 N10665 NW 0276 - ХН65МВУ - NiMo16Cr15W ЭП760
Hastelloy B3 2.4600 N010675 – - - - - -
Hastelloy X 2.4665 N06002 – – – – - -
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Cupro Nickel 90/10 2.0872 C70600 – – – – - -
Cupro Nickel 70/30 2.0882 C71500 – – – – - -
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Alloy 20 2.4660 N08020 - - - Z2NCUD31-20AZ NiCr20CuMo -
02 / ELEMENTAL DATA

Chemical Composition

TECHNICAL DATA
Grade C Mn Si S Cu Fe Ni Mo Al Ti
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min - - -
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min - - -
Grade C Mn Si S Cu Fe Ni Mo Al Ti
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min - - -
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min - - -
Grade C Mn Si S Cu Fe Ni Cr Al Ti
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00 - -
Inconel 601 0.10 max 1.00 max 0.50 max 0.015max 1.00 max Balance 58.0 – 63.0 21.0 – 25.0 - -
Inconel 625 0.10 max 0.50 max 0.50 max 0.015max – 5.0 max 58.0 min 20.0 – 23.0 - -
Inconel 718 0.08 max 0.35 max 0.35 max 0.015max 0.30 max – 50.00 – 55.00 17.00 – 21.00 - -
Grade C Mn Si S Cu Fe Ni Cr Al Ti
Incoloy 800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
Incoloy 800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
Incoloy 800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ
Incoloy 825 0.05 max 1.00 max 0.5 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20
Grade Ni Cr Fe Si Mo Cu Mn C S Al
Incoloy 925 42 – 46 19.55 – 22.5 22 min 0.5 max 2.5 – 3.5 1.5 – 3.0 1.0 max 0.03 max 0.03 max 0.1 – 0.5
Grade C Mn Si S Cu Fe Ni Cr Sn Pb
Incoloy 330 0.08 max 2.00 max 0.75-1.50 0.03 max 1.00 max Balance 34.0-37.0 17.0-20.0 0.025 0.005 max
Grade C Mn Si S Co Ni Cr Fe Mo P
Hastelloy C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max
Hastelloy C276 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max
Hastelloy B2 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max
Grade Ni Mo Cr Fe W Mn C Al Ti Si
Hastelloy B3 65.0 min 28.5 1.5 1.5 3.0 max 3.0 max 0.01 max 0.50 max 0.2 max 10 max
Grade Ni Mo Cr Fe Mn C Co Si P S
Hastelloy X Balance 8.00 – 10.00 20.50 – 23.00 17.00 – 20.00 1.00 max 0.05 – 0.15 0.50 – 2.50 1.00 max 0.04 max 0.03 max
Grade Cu Mn Pb Ni Fe Zn Cr Mo Al Ti
Cupro Nickel 90/10 88.6 min 1.0 max 0.05 max 9-11 max 1.8 max 1 max - - - -
Cupro Nickel 70/30 65 min 1.0 max 0.05 max 29-33 max 0.4-1.0 max 1 max - - - -
Grade C Mn Si S Cu Ni Cr Fe Mo P
Alloy 20  0.07 max  2.00 max 1.00 max 0.035 max 3.0-4.0  32.0-38.0 19.0-21.0  29.85 min*  2.0-3.0  0.045 max
03 / PERFORMANCE DATA

Mechanical Properties

TECHNICAL DATA
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %
Inconel 625 8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %
Inconel 718 8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %
925 8.14 g/cm3 1343°C 650 300 30 %
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %
Hastelloy B2 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %
Hastelloy B3 9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%
Hastelloy X 8.22 g/cm³ 1355°C 655 MPa 240 MPa 35%
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Cupro Nickel 90/10 0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %
Cupro Nickel 70/30 0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Alloy 20  8.1 g/cm3  1443 °C (2430 °F) Psi -80,000, MPa -551 Psi – 35,000, MPa – 241 30%

Interactive Product Tool

Review your product in 3D before requesting a quote.

  • Choose a product preset
  • Adjust available dimensions
Open 3D Builder