NAVKARFITTINGS & FORGINGS
3D FITTING BUILDER

Your dimensions.
Your connection.

Configure a buttweld fitting in three steps. Choose a shape, select a material, and enter your dimensions to explore it in 3D.

01 CHOOSE YOUR FITTING

Nominal size is a reference label. The actual dimensions you enter below determine the model.

02 SELECT THE MATERIAL

Typical grade density; editable to match your material datasheet.

Carbon and alloy steel show a black anti-rust coating. Bevels show exposed metal. Other finishes are illustrative; confirm the final surface treatment with Navkar.

03 SET DIMENSIONS

Enter outside diameter, wall thickness, centerline radius, bend angle and straight end length.

Starting values are examples, not a standard lookup. Enter actual wall thickness, bevel angle and root face. Bevel angle is measured from the end face; confirm the preparation with your client.

INTERACTIVE PREVIEW360° VIEW
3D

Your fitting starts here.

Set your dimensions, then select Generate 3D fitting.

Ready when you are.

Built from your dimensions

Drag to rotate

Models fit automatically within this window. Compare the dimension summary, not the on-screen size. Weld ends are bevelled; the stub-end lap and closed cap crown are not. Tee/cross junctions and cap crowns are simplified.

Explore elbows, bends, equal and reducing tees, crosses, concentric and eccentric reducers, caps, and lap-joint stub ends. This is a dimensional visualization, not a manufacturing drawing, standards-compliance check, or pressure-rating calculation. Navkar must confirm specifications and availability.

ENGINEERED FOR CONNECTION